Picture Name
Picture Name
Characteristics of high temperature tape

Characteristics of high temperature tape

High-temperature adhesive tape is an adhesive tape, which is mainly composed of a substrate and glue. It can be used in a high-temperature working environment. Its temperature resistance is usually between 120 degrees and 260 degrees. In many industries, high temperature tapes are applied. Although many people are aware of this kind of high temperature tape, they are not clear about some of its characteristics and uses.

27

2021

/

10

How to deal with the failure of the squeegee caused by static electricity in printing

How to deal with the failure of the squeegee caused by static electricity in printing

Elimination: After observation, some of the paper is not separated during the separation process. When the paper separating nozzle sucks the paper, the double paper is picked up, and the paper feeding nozzle also sucks the double paper and sends it to the paper feeding roller. It must be detected and signaled by the double sheet detector. If it is checked that the printing failure of the squeegee is not caused by a large suction, then the analysis is due to the static electricity on the paper, which causes the two papers to be sucked together and not separated by the fixed blowing nozzle, and the two sheets are simultaneously separated by the paper suction nozzle. Sucking, causing the paper delivery nozzle to send double sheets by mistake. At this time, the relative humidity of the squeegee printing workshop should be increased, and the relative humidity should be increased when drying the paper to keep the paper at a certain moisture content. When the squeegee is turned on for printing, the double-sheet failure can be eliminated. In order to prevent double-sheet failures caused by static electricity on high-speed printing gravure presses, static eliminator static brushes should be installed.

27

2021

/

10

Opportunities and Challenges in the Printing Equipment Industry

Opportunities and Challenges in the Printing Equipment Industry

The 2016 National Offset Printing Plate Working Conference was held in Taizhou International Hotel on November 9. All colleagues from the offset printing plate industry from all over the country gathered together to review the fruitful results of the offset printing plate industry over the past year and exchange experience. Discussing the development prospects of the industry, and a clear understanding of the ups and downs that may occur on the way forward, are important for us to adjust our structure, meet challenges, and strengthen our confidence in the future. Since 2010, the development of the offset printing plate industry has entered a transitional period. During this period, the progress of printing technology has caused great challenges to traditional products. The downward pressure on foreign economies has become increasingly obvious. The domestic economy has transitioned from a high-speed growth period to a stable growth period. The offset printing plate industry has also entered a low-speed development track from an ultra-high-speed development period. The transition period of our industry is undoubtedly very difficult, but it is full of hope. The offset printing plate industry has rebounded to a certain extent in 2015 over the previous year. Although the growth rate is low, under the current economic environment, whether it is in the printing equipment industry or in the entire printing industry, it should be considered basically satisfactory. .

27

2021

/

10

Quality first, abide by integrity, professional service, customer first

Quality first, abide by integrity, professional service, customer first

The company adopts gravure printing squeegees made of special steel materials such as Switzerland, Germany, Sweden, etc., with registered trademarks ADM, RGF, DRF, KRUPP and other brand ink squeegees,

27

2021

/

10

< 12 >

Ruian Guangfa Printing Equipment Co., Ltd.

Powered  by WWW.300.CN   seo 

Business License