The working principle of pneumatic pump

1. Compressed air is the power.
2. Features

Pneumatic pump

Pneumatic diaphragm pump is a positive displacement pump whose volume changes caused by the reciprocating deformation of the diaphragm. Its working principle is similar to that of a plunger pump. Due to the characteristics of the working principle of the diaphragm pump, the diaphragm pump has the following characteristics: (1) The pump will not overheat: Compressed air is used as power, and it is a process of expansion and heat absorption when exhausting. The temperature of the pneumatic pump is reduced when it is working, and no harmful gas is discharged.

(2) No electric sparks: Pneumatic diaphragm pumps do not use electricity as power, and prevent static sparks after being grounded

(3) Liquids containing particles can be passed: because the volumetric work and the inlet is a ball valve, it is not easy to be blocked.

(4) The shear force on the material is extremely low: how to suck in and out when working, so the agitation of the material is small, suitable for the transportation of unstable materials

(5) The flow can be adjusted, and a throttle valve can be installed at the material outlet to adjust the flow.

(6) It has the function of self-priming.

(7) It can run dry without danger.

(8) Can dive for work.

(9) The fluids that can be transported are extremely wide, ranging from low-viscosity to high-viscosity, and viscous from corrosive.

(10) There is no complicated control system, no cables, fuses, etc.

(11) Small size, light weight and easy to move.

(12) There is no need for lubrication, so it is easy to maintain and will not pollute the working environment due to dripping.

(13) The pump can always maintain high efficiency and will not be reduced due to wear.

(14) 100% energy utilization, when the outlet is closed, the pump will automatically stop, and the equipment will move, wear, overload, and heat

(15) There is no dynamic seal, easy maintenance to avoid leakage. No dead spots when working.