悬挂式离子风机可产生大量的带有正负电荷的气流，可以将物体上所带的电荷中和掉，当物体表面所带电荷为负电荷时，它会吸引气流中的正电荷，当物体表面所带电荷为正电荷时，它会吸引气流中的负电荷，从而使物体表面上的静电被中和，达到消除静电的目的。

In addition to static brush 　　 The static electricity generated in the gravure printing process is an important factor affecting the printing quality. Excessive static electricity may even generate sparks and cause fires. It is made of high-efficiency conductive carbon fiber, which neutralizes static electricity by self-induction, and is matched with various kinds of electricity eliminators, and can be made into various forms of static eliminators.

除静电毛刷 　　凹印过程中产生的静电是影响印刷质量的一个重要因素，过强的静电甚至于会产生火花，引起火灾。它采用高效导电碳纤维制成，自感应中和静电，与各种消电器配套，可制成多种形式的静电消除器。

The static eliminator is composed of a high-voltage power generator and a discharge electrode (usually made of ion needles). The air is ionized into a large number of positive and negative ions through high-voltage corona discharge, and then a large number of positive and negative ions are blown to the surface of the object with wind to neutralize it. Static electricity, or directly put the static eliminator close to the surface of the object to neutralize the static electricity.

　　静电消除器它由高压电源产生器和放电极（一般做成离子针）组成,通过尖端高压电晕放电把空气电离为大量正负离子，然后用风把大量正负离子吹到物体表面以中和静电，或者直接把静电消除器靠近物体的表面而中和静电。

1. Before use: 　　A. When the punching machine continues to work, add lubricating oil or change new oil at least once every hour to keep the punch and guide sleeve lubricated. 　　 B. When using, it is necessary to clean up the residue on the punching machine in time, especially the residue on the lower mold, and then start the machine after cleaning. 　　C. When using, pay attention to whether the punching machine is loose or has abnormal sound. If any problem is found, deal with it in time. 　　D. When the position of the punching machine is found to be offset, you can't beat it with iron, only use a rubber hammer. 　　E, air pressure is recommended, (normal 4mpa)

1、使用前： 　　A、打孔机持续工作时，至少每小时要加润滑油一次或换新油一次，以使沖头与导套保持润滑。 　　B、使用时，要对打孔机上的残渣及时清理，特別是下模残留物，清理干淨后再开机。 　　C、使用時，注意打孔机有无松动或声音异常现象，如发现问题，及时进行处理。 　　D、发现打孔机位置有偏移时，不能用铁器敲打，只能用胶錘。 　　E、建议使用气压，（正常4mpa）

Futai Photoelectric Eye Purpose: Inspection of photoelectric correction system Application: gravure printing machine, laminating machine, bag making machine, slitting machine, automatic packaging machine, etc.;

富台光电眼 用途：检验光电纠编系统 适用：凹版印刷机、复合机、制袋机、分切机、自动包装机等;

Purpose: Inspection of photoelectric correction system Application: gravure printing machine, laminating machine, bag making machine, slitting machine, automatic packaging machine, etc.; parameter Detection method: coaxial reflection type Detection distance: 10±2mm Power supply voltage: DC10-30V±10% ripple <10% Current consumption: 45mA or less

用途：检验光电纠编系统 适用：凹版印刷机、复合机、制袋机、分切机、自动包装机等; 参数 检出方式：同轴反射式 检测距离：10±2mm 供电电压：DC10-30V±10% 波纹<10% 消耗电流：45mA以下

Purpose: used for color matching Application: Printing, packaging, plastics, advertising, design, publishing, electronics, toys, gifts, printing and dyeing products, luggage, shoes, rubber, chemical coatings, ceramics, handicrafts, furniture manufacturing and other industries PANTONE Recipe Guide—Glossy coated paper & offset paper (two-volume set CU color card)

用途：用于颜色配比 适用：印刷、包装、塑胶、广告、设计、出版、电子、玩具、礼品、印染品、箱包、鞋业、橡胶、化工涂料、陶瓷、工艺品、家具制造等行业使用 PANTONE配方指南—光面铜版纸&胶版纸（两册套装CU色卡）

Instructions for the selection of steel wire brush and copper wire brush: Because the hardness of copper wire is relatively soft, if it is used to clean the ceramic surface with extremely high hardness, it is easy to break the wire and block the mesh. Therefore, it can only be used to clean chrome-plated metal with relatively soft hardness. Anilox roller and gravure plate roller. The hardness of the wire brush is relatively high. If it is used to clean metal anilox rollers and or gravure plate rollers, it will easily cause abrasion or scratches on the surface, so it can only be used to clean ceramic anilox rollers with relatively high hardness.

　　钢丝刷、铜丝刷选用说明：由于铜丝硬度较软，如果用于清洗硬度极大的陶瓷表面的话，很容易断丝并堵塞网孔，因而只能用于清洗硬度相对较软的镀铬金属网纹辊和凹印版辊。而钢丝刷的硬度较大，如果用于清洗金属网纹辊和或凹印版辊的话，容易给表面造成磨损或者划伤，因而只能用于清洗硬度相对较大的陶瓷网纹辊。

Instructions for the selection of steel wire brush and copper wire brush: Because the hardness of copper wire is relatively soft, if it is used to clean the ceramic surface with extremely high hardness, it is easy to break the wire and block the mesh. Therefore, it can only be used to clean chrome-plated metal with relatively soft hardness. Anilox roller and gravure plate roller. The hardness of the wire brush is relatively high. If it is used to clean metal anilox rollers and or gravure plate rollers, it will easily cause abrasion or scratches on the surface, so it can only be used to clean ceramic anilox rollers with relatively high hardness.

　　钢丝刷、铜丝刷选用说明：由于铜丝硬度较软，如果用于清洗硬度极大的陶瓷表面的话，很容易断丝并堵塞网孔，因而只能用于清洗硬度相对较软的镀铬金属网纹辊和凹印版辊。而钢丝刷的硬度较大，如果用于清洗金属网纹辊和或凹印版辊的话，容易给表面造成磨损或者划伤，因而只能用于清洗硬度相对较大的陶瓷网纹辊。

1. Overview of the instrument This instrument is a mechanical pointer rotary viscometer, which can measure the viscous resistance of liquids and the dynamic viscosity of liquids in a large range. It can be widely used for grease, paint, plastics, food, medicine, adhesives, etc. A measurement of fluid viscosity. 2. Main technical features 1. Synchronous motor is used to rotate at a stable speed, connected to the scale disc, and then the rotor is driven to rotate through the hairspring and the rotating shaft. 2. The gear system and clutch are used for speed change, which is operated by a special rotary knob, and the speed is divided into four speeds, which can be selected according to the measurement needs. 3. Four types of rotors 1 to 4 are attached, and 4 speeds can be preset. The speed can be selected according to the viscosity of the liquid to be measured to meet the measurement requirements of different ranges. 4. Equipped with pointer fixing control device (pointer lever), it is convenient to read accurate readings when the speed is fast. 3. Main technical indicators and parameters 1. Measuring range: 10～100000mPa·s; 2. Measuring error: ±5% (F·S); 3. Measuring rotor: No. 1, 2, 3, 4 rotor; 4. Rotor Speed: 　6 rpm, 12 rpm, 30 rpm, 60 rpm; 5. Power supply: AC 220V±10% 50Hz±10%; 6. Dimensions: 300×300×450mm; 7. Net weight: 2kg (excluding bracket).

一、仪器概述本仪器为机械指针式旋转粘度计，能在较大的范围内测量液体的粘性阻力与液体的动力粘度，可广泛应用于对油脂、油漆、塑料、食品、药物、胶粘剂等各种流体粘度的测量。二、主要技术特点 1、采用同步电机以稳定的转速旋转，连接刻度圆盘，再通过游丝和转轴带动转子旋转。 2、采用齿轮系统及离合器进行变速，由专用旋转旋钮操作，分四档转速，可以根据测定需要选择。 3、附有1至4号四种转子，可预置4档转速，根据被测液体粘度的高低选择转速配合使用，满足不同范围的测量要求。 4、装有指针固定控制装置（指针控制杆），当转速较快时便于读取准确的读数。三、主要技术指标和参数 1、测量范围： 10～100000mPa·s； 2、测量误差： ±5%(F·S)； 3、测量转子： 1、2、3、4号转子； 4、转子转速： 　6转/分、12转/分、30转/分、60转/分； 5、供电电源： 交流220V±10% 50Hz±10%； 6、外形尺寸： 300×300×450mm； 7、净　　重： 2kg(不包括支架)。

1. Overview of the instrument This instrument is a mechanical pointer rotary viscometer, which can measure the viscous resistance of liquids and the dynamic viscosity of liquids in a large range. It can be widely used for grease, paint, plastics, food, medicine, adhesives, etc. A measurement of fluid viscosity. 2. Main technical features 1. Synchronous motor is used to rotate at a stable speed, connected to the scale disc, and then the rotor is driven to rotate through the hairspring and the rotating shaft. 2. The gear system and clutch are used for speed change, which is operated by a special rotary knob, and the speed is divided into four speeds, which can be selected according to the measurement needs. 3. Four types of rotors 1 to 4 are attached, and 4 speeds can be preset. The speed can be selected according to the viscosity of the liquid to be measured to meet the measurement requirements of different ranges. 4. Equipped with pointer fixing control device (pointer lever), it is convenient to read accurate readings when the speed is fast. 3. Main technical indicators and parameters 1. Measuring range: 10～100000mPa·s; 2. Measuring error: ±5% (F·S); 3. Measuring rotor: No. 1, 2, 3, 4 rotor; 4. Rotor Speed: 　6 rpm, 12 rpm, 30 rpm, 60 rpm; 5. Power supply: AC 220V±10% 50Hz±10%; 6. Dimensions: 300×300×450mm; 7. Net weight: 2kg (excluding bracket).

一、仪器概述本仪器为机械指针式旋转粘度计，能在较大的范围内测量液体的粘性阻力与液体的动力粘度，可广泛应用于对油脂、油漆、塑料、食品、药物、胶粘剂等各种流体粘度的测量。二、主要技术特点 1、采用同步电机以稳定的转速旋转，连接刻度圆盘，再通过游丝和转轴带动转子旋转。 2、采用齿轮系统及离合器进行变速，由专用旋转旋钮操作，分四档转速，可以根据测定需要选择。 3、附有1至4号四种转子，可预置4档转速，根据被测液体粘度的高低选择转速配合使用，满足不同范围的测量要求。 4、装有指针固定控制装置（指针控制杆），当转速较快时便于读取准确的读数。三、主要技术指标和参数 1、测量范围： 10～100000mPa·s； 2、测量误差： ±5%(F·S)； 3、测量转子： 1、2、3、4号转子； 4、转子转速： 　6转/分、12转/分、30转/分、60转/分； 5、供电电源： 交流220V±10% 50Hz±10%； 6、外形尺寸： 300×300×450mm； 7、净　　重： 2kg(不包括支架)。

1. The system consists of NDJ-1B rotary viscometer, double-layer glass insulation cylinder, external printer and HWY-10 constant temperature water bath. 2. Because the viscosity is very sensitive to temperature, the constant temperature water bath and heat preservation cylinder ensure a stable and constant temperature environment for the tested liquid, thus ensuring the accuracy of the test results. 3. The technical parameters of HWY-10 circulating constant temperature water bath are: temperature control range -10℃～95℃, temperature fluctuation degree ±0.1℃.

1、系统由NDJ-1B旋转粘度计、双层玻璃保温筒、外置打印机和HWY-10恒温水浴组成。 2、由于粘度对温度十分敏感，恒温水浴和保温筒保证被测液体有一个稳定而恒温的温度环境，从而保证了测试结果的准确性。 3、HWY-10循环恒温水浴的技术参数为：控温范围-10℃～95℃，温度波动度±0.1℃。

1. Instrument Overview This instrument is designed and manufactured in accordance with the requirements of T0625 "Asphalt Brookfield Rotational Viscosity Test (Brockfield Viscometer Method)" in the People's Republic of China industry standard JTJ052 "Highway Engineering Asphalt and Asphalt Mixture Test Regulations" It is suitable for measuring the absolute viscosity of Newtonian liquids and the apparent viscosity of non-Newtonian liquids. It can be widely used to measure the viscosity of various fluids such as asphalt, hot melt adhesives, paraffin wax, and polymers. 2. Main technical features 1. This instrument adopts advanced mechanical design technology, manufacturing technology and microcomputer control technology, with accurate data collection, high measurement sensitivity, reliable test results, convenient operation and beautiful appearance. 2. The display uses a white backlit, high-brightness LCD display, which can directly display the viscosity, rotor number, speed and other information of the sample, and the data is displayed clearly. 3. The test results can be displayed in real time on the display screen or printed out via a printer. In addition, through the RS232 data communication port of this instrument, it can also be connected to a personal computer. 3. Main technical indicators and parameters 1. Measuring range: 100mPa·s～2×105mPa·s (The measuring range can be expanded to 4×105mPa·s with the option of No. 30 rotor); 2. Rotor specifications: 21, 27, 28, No. 29 four kinds of rotors (optional 30 No. rotor); 3. Rotor speed: 5, 10, 20, 50r/min four gears; 4. Measurement error: ±1% (F·S), (optional 30 No. rotor ±3%(F·S)); 5. Temperature control range: 45℃～200℃; 6. Temperature control accuracy: ±0.1℃; 7. Sample container volume: 20ml; 8. Power supply: AC 220V±10%, 50Hz; 9. Ambient temperature: 5℃～35℃ (when the heater control temperature is close to room temperature, the air conditioner should be activated to make the working environment temperature lower than the heater control temperature by about 5℃); 10. The environment is relative Humidity: not more than 80%. 4. Optional accessories 1. NDJ-1C viscosity-temperature curve software 2. 30# rotor 3. Standard viscosity oil 4. One-time economical sample holder

一、仪器概述本仪器是按照中华人民共和国行业标准JTJ052《公路工程沥青及沥青混合料试验规程》中的T0625《沥青布氏旋转粘度试验（布洛克菲尔德粘度计法）》规定的要求设计制造的，适用于测量牛顿型液体的绝对粘度和非牛顿型液体的表观粘度，可广泛应用于对沥青、热熔胶、石蜡、高聚物等各种流体粘度的测量。二、主要技术特点 1、本仪器采用先进的机械设计技术、制造工艺和微电脑控制技术，数据采集准确，测量灵敏度高，测试结果可靠，使用操作方便，造型美观大方。 2、显示器选用白背光、高亮度的LCD显示屏，可直接显示样品的粘度、转子编号、速度等信息，数据显示清晰。 3、测试结果可在显示屏上实时显示，也可通过打印机打印输出。另外，通过本仪器的RS232数据通讯口，还可与个人计算机相连接。三、主要技术指标和参数 1、测量范围： 100mPa·s～2×105mPa·s （选配30号转子测量范围可扩大到 4×105mPa·s）； 2、转子规格： 21、27、28、29号四种转子（可另选配30号转子）； 3、转子转速： 5、10、20、50r/min四档； 4、测量误差： ±1%(F·S)、（选配30号转子时±3%(F·S)）； 5、控温范围： 45℃～200℃； 6、控温精度： ±0.1℃； 7、盛样筒容积： 20ml； 8、工作电源： AC 220V±10%，50Hz； 9、环境温度： 5℃～35℃（加热器控制温度接近室温时，应启用空调器，使工作环境温度低于加热器控制温度约5℃）； 10、环境相对湿度： 不大于80%。四、选配件 1、NDJ-1C粘温曲线软件 2、30#转子 3、标准粘度油 4、一次性使用的经济型盛样筒

1. Instrument Overview This instrument is designed and manufactured in accordance with the requirements of T0625 "Asphalt Brookfield Rotational Viscosity Test (Brockfield Viscometer Method)" in the People's Republic of China industry standard JTJ052 "Highway Engineering Asphalt and Asphalt Mixture Test Regulations" It is suitable for measuring the absolute viscosity of Newtonian liquids and the apparent viscosity of non-Newtonian liquids. It can be widely used to measure the viscosity of various fluids such as asphalt, hot melt adhesives, paraffin wax, and polymers. 2. Main technical features 1. This instrument adopts advanced mechanical design technology, manufacturing technology and microcomputer control technology, with accurate data collection, high measurement sensitivity, reliable test results, convenient operation and beautiful appearance. 2. The display uses a white backlit, high-brightness LCD display, which can directly display the viscosity, rotor number, speed and other information of the sample, and the data is displayed clearly. 3. The test results can be displayed in real time on the display screen or printed out via a printer. In addition, through the RS232 data communication port of this instrument, it can also be connected to a personal computer. 3. Main technical indicators and parameters 1. Measuring range: 100mPa·s～2×105mPa·s (The measuring range can be expanded to 4×105mPa·s with the option of No. 30 rotor); 2. Rotor specifications: 21, 27, 28, No. 29 four kinds of rotors (optional 30 No. rotor); 3. Rotor speed: 5, 10, 20, 50r/min four gears; 4. Measurement error: ±1% (F·S), (optional 30 No. rotor ±3%(F·S)); 5. Temperature control range: 45℃～200℃; 6. Temperature control accuracy: ±0.1℃; 7. Sample container volume: 20ml; 8. Power supply: AC 220V±10%, 50Hz; 9. Ambient temperature: 5℃～35℃ (when the heater control temperature is close to room temperature, the air conditioner should be activated to make the working environment temperature lower than the heater control temperature by about 5℃); 10. The environment is relative Humidity: not more than 80%. 4. Optional accessories 1. NDJ-1C viscosity-temperature curve software 2. 30# rotor 3. Standard viscosity oil 4. One-time economical sample holder

一、仪器概述本仪器是按照中华人民共和国行业标准JTJ052《公路工程沥青及沥青混合料试验规程》中的T0625《沥青布氏旋转粘度试验（布洛克菲尔德粘度计法）》规定的要求设计制造的，适用于测量牛顿型液体的绝对粘度和非牛顿型液体的表观粘度，可广泛应用于对沥青、热熔胶、石蜡、高聚物等各种流体粘度的测量。二、主要技术特点 1、本仪器采用先进的机械设计技术、制造工艺和微电脑控制技术，数据采集准确，测量灵敏度高，测试结果可靠，使用操作方便，造型美观大方。 2、显示器选用白背光、高亮度的LCD显示屏，可直接显示样品的粘度、转子编号、速度等信息，数据显示清晰。 3、测试结果可在显示屏上实时显示，也可通过打印机打印输出。另外，通过本仪器的RS232数据通讯口，还可与个人计算机相连接。三、主要技术指标和参数 1、测量范围： 100mPa·s～2×105mPa·s （选配30号转子测量范围可扩大到 4×105mPa·s）； 2、转子规格： 21、27、28、29号四种转子（可另选配30号转子）； 3、转子转速： 5、10、20、50r/min四档； 4、测量误差： ±1%(F·S)、（选配30号转子时±3%(F·S)）； 5、控温范围： 45℃～200℃； 6、控温精度： ±0.1℃； 7、盛样筒容积： 20ml； 8、工作电源： AC 220V±10%，50Hz； 9、环境温度： 5℃～35℃（加热器控制温度接近室温时，应启用空调器，使工作环境温度低于加热器控制温度约5℃）； 10、环境相对湿度： 不大于80%。四、选配件 1、NDJ-1C粘温曲线软件 2、30#转子 3、标准粘度油 4、一次性使用的经济型盛样筒

1. Instrument Overview This instrument is an upgraded product of our company's rotational viscometer. This instrument adopts advanced mechanical design technology, manufacturing technology and microcomputer control technology, and data collection is accurate; the display adopts a white backlit, high-brightness LCD display screen, and the data is clearly displayed; it is designed with a dedicated printing interface, and the measurement results can be printed out through a printer. 2. Main technical features 1. This instrument adopts advanced mechanical design technology, manufacturing technology and microcomputer control technology, with accurate data collection, stepless and continuously adjustable rotor speed, high measurement sensitivity, reliable test results, convenient operation and beautiful appearance . 2. The display uses a white backlit, high-brightness LCD display, which can directly display the viscosity, rotor number, speed and other information of the sample, and the data is displayed clearly. 3. The test results can be displayed in real time on the display screen or printed out via a printer. In addition, through the RS232 data communication port of this instrument, it can also be connected to a personal computer. 4. With viscosity-temperature curve software, the curve can be used for data analysis and guide scientific research and production. 3. Main technical indicators and parameters 1. Measuring range: 0.1～6000000mPa·s; 2. Rotor specifications: 5 types of rotors 0～4; 3. Rotor speed: 0.1～100 stepless speed regulation; 4. Measurement error: ± 2%(F·S); 5. Power supply: AC 220V±10%, 50Hz±10%; 6. Working environment: temperature 5℃～35℃, relative humidity not more than 80%. 4. Optional accessories 1. Standard viscosity oil 2. Glass double-layer thermostatic measuring cup 3. Small sample adapter 4. Constant temperature water bath (HWY-10 type)

一、仪器概述本仪器是本公司旋转粘度计的升级换代产品。本仪器采用先进的机械设计技术、制造工艺和微电脑控制技术，数据采集准确；显示器选用白背光、高亮度的LCD显示屏，数据显示清晰；设计有专用打印接口，可通过打印机打印出测量结果。二、主要技术特点 1、本仪器采用先进的机械设计技术、制造工艺和微电脑控制技术，数据采集准确，转子转速无级连续可调，测量灵敏度高，测试结果可靠，使用操作方便，造型美观大方。 2、显示器选用白背光、高亮度的LCD显示屏，可直接显示样品的粘度、转子编号、速度等信息，数据显示清晰。 3、测试结果可在显示屏上实时显示，也可通过打印机打印输出。另外，通过本仪器的RS232数据通讯口，还可与个人计算机相连接。 4、配粘温曲线软件，通过曲线可作数据分析并指导科研和生产。三、主要技术指标和参数 1、测量范围： 0.1～6000000mPa·s； 2、转子规格： 0～4号5种转子； 3、转子转速： 0.1～100无级调速； 4、测量误差： ±2%(F·S)； 5、供电电源： 交流220V±10%，50Hz±10%； 6、工作环境： 温度5℃～35℃，相对湿度不大于80%。四、选配件 1、标准粘度油 2、玻璃双层恒温测量杯 3、小样品适配器 4、恒温水浴（HWY-10型）

1. Instrument Overview This instrument is designed and manufactured in accordance with the requirements of T0625 "Asphalt Brookfield Rotational Viscosity Test (Brockfield Viscometer Method)" in the People's Republic of China industry standard JTJ052 "Highway Engineering Asphalt and Asphalt Mixture Test Regulations" It is suitable for measuring the absolute viscosity of Newtonian liquids and the apparent viscosity of non-Newtonian liquids. It can be widely used to measure the viscosity of various fluids such as asphalt, hot melt adhesives, paraffin wax, and polymers. 2. Main technical features 1. This instrument adopts advanced mechanical design technology, manufacturing technology and microcomputer control technology, with accurate data collection, high measurement sensitivity, reliable test results, convenient operation and beautiful appearance. 2. The display uses a white backlit, high-brightness LCD display, which can directly display the viscosity, rotor number, speed and other information of the sample, and the data is displayed clearly. 3. The test results can be displayed in real time on the display screen or printed out via a printer. In addition, through the RS232 data communication port of this instrument, it can also be connected to a personal computer. 4. With viscosity-temperature curve software, the curve can be used for data analysis and guide scientific research and production. 3. Main technical indicators and parameters 1. Measuring range: 25mPa·s～1×107mPa·s (the measuring range can be expanded to 2×107mPa·s with the option of No. 30 rotor); 2. Rotor specifications: 21, 27, 28, Four types of rotors of No. 29 (No. 30 rotors are optional); 3. Rotor speed: 0.1--200r/min stepless speed regulation, (built-in 12 speeds); 4. Measurement error: ±2% (F·S ), (±3%(F·S) when No. 30 rotor is selected); 5. Temperature control range: 25℃～200℃; 6. Temperature control accuracy: ±0.1℃; 7. Sample container volume: 20ml; 8. Working power supply: AC 220V±10%, 50Hz; 9. Ambient temperature: 5℃～35℃ (When the heater control temperature is close to room temperature, the air conditioner should be activated to make the working environment temperature lower than the heater control temperature by about 5℃ ); 10. The relative humidity of the environment: not more than 80%. 4. Optional accessories 1. NDJ-1F viscosity-temperature curve software 2. 30# rotor 3. Standard viscosity oil 4. One-time economical sample container