Single-phase pneumatic pump

Single-phase pneumatic diaphragm pump
Working principle and characteristics:
　　 1. This product uses the air compressed by the air compressor as the power, and adjusts the air size through the needle valve to make the diaphragm move to achieve the purpose of conveying fluid.
　　 Two, no spark, suitable for explosion-proof places.
　　 Three, low air consumption, the media flow is steplessly adjusted through the compressed air intake valve.
　　 Fourth, the diaphragm is made of corrosion-resistant materials, which can transport various corrosive media.
　　 5. Low failure rate, simple installation and convenient maintenance.
　　6. ​​The pump casing is made of high-quality materials, and the internal parts are made of stainless steel and copper, ensuring light weight, elegance and beauty. No embroidery, corrosion resistance and other characteristics.
Scope of application:
　　 1. Printing industry: ink (water-based, oil-based) solvents (ethanol, toluene, acetone, glue, paint, etc.)
　　 2. Chemical industry: acid and alkali, etc.
Precautions:
　　 1. When replacing the diaphragm, press the pump body on the drill press and other equipment, and then remove the 6 M5 hexagon socket screws to prevent the spring from jumping out and hurting people.
　　 2. After the work is finished, clean the pump with water or other decomposition solution medium, and the cleaning should be carried out under the working condition
technical parameter:
　　 Working pressure: 0.25-0.6/Mpa
　　 Maximum suction range: 6M
　　Maximum output flow: 14L
Connection thread: Ink inlet: G1/4"
　　 Ink outlet: G1/2" G1/4"
　　 Air inlet: G1/4"
Fluid status: pulsed