Two-phase pneumatic pump

Working principle and characteristics:
　　 1. This product uses the air compressed by the air compressor as the power, and adjusts the air size through the needle valve to make the diaphragm move to achieve the purpose of conveying fluid.
　　 Two, no spark, suitable for explosion-proof places.
　　 Three, low air consumption, the media flow is steplessly adjusted through the compressed air intake valve.
　　 Fourth, the diaphragm is made of corrosion-resistant materials, which can transport various corrosive media.
　　 5. Low failure rate, simple installation and convenient maintenance.
　　6. ​​The pump casing is made of high-quality materials, and the internal parts are made of stainless steel and copper, ensuring light weight, elegance and beauty. No embroidery, corrosion resistance and other characteristics.
Scope of application:
　　 1. Printing industry: ink (water-based, oil-based) solvents (ethanol, toluene, acetone, glue, paint, etc.)
　　 2. Chemical industry: acid and alkali, etc.
Precautions:
　　 1. After the pump has been working continuously for eight months, it is recommended to replace the diaphragm in time to avoid the damage of the diaphragm, causing the medium to enter the air cavity and block the pores.
　　 2. The air source must be kept clean when working, otherwise the reversing valve will stop working and an air filter must be equipped.
technical parameter:
　　 Working pressure: 0.12-0.8/Mpa
　　 Maximum suction range: 8M
　　Maximum output flow: 14L
　　 Connection thread: Ink inlet: G1/2"
　　 Ink outlet: G1/2"
　　 Air inlet: G1/4"
　　 Fluid state: no pulse